E3 Engraving Machines

E3 Certified Engraving Machines have been tested for accuracy and operation. E3 machines have a 6 month warrantee and have been designed from the factory with an all silver face and powder coated pearl white body. All have been Pressure tested, knobs and buttons secure, motor seals smooth, internal hoses and connections checked and sealed.

An upgraded professional handpiece is included with each E3 machine, SPECIFIC TO OUR MACHINE, other similar models come with an identical hand piece, but not the same. Also essential adapters to connect scribe pen and air compressor to machine are also included.

Every part of our machine has been upgraded. See the differences in class and understand the time invested to ensure the best possible engraving machine at a low cost. Pressure of the hit can be manually regulated and speeds can be controlled from 100-4000 SPM, which is reflected on the face of the machine. Our machine also reads PSI, and has multiple internal upgrades to ensure longevity and the strongest hitting engraver in the world. Upgraded Professional Aluminum handpiece and foot pedal are included. Engraving machine can engrave into various metals, and is widely used in the Heavy Metal engraving field. This is the machine E3 Engraving still uses for most of our clients metal engraving needs and during class. Very strong and hard hitting. Machine is made to last for many years with tons of hours. Open and lightly oil handpiece internal piston once a month to maintain performance. Pictured are the older versions of the included handpiece. The handpiece in the upper right of the picture is included with E3 machine. *For extra deep lines pair E3 Machine with GRS handpiece 720 or 721.

*** A similar machine without the internal upgrades or upgraded aluminum handpieces are available for a lower cost from Amazon. Links can be found on our Equipment link page. Some of the various handpieces included with other machines not affiliated with E3 are pictured above.

 

It is very important to note, just as any engraving machine or handpiece an important part of engraving is obtaining gravers (the blades) and learning the intricate techniques involved with sharpening them. Sharpening your gravers should be as much importance as the machine or handpiece you choose. Gravers are sold separately by two recommended companies: Lyndsay and GRS, which are not affiliated with E3 Engraving.

 

Also, it doesn’t matter how expensive your equipment is, you must put in the PRACTICE to understand the flow of engraving into the metal. Think of it like swimming. You may know how to swim, and the technique, but it takes practice to learn how to flow with the water. It’s the same with engraving metal, there is a balance between the depth, hand pressure, and control to achieve a perfect cut. The better your technique the faster your graver will cut into the metal. Advise: Practice on aluminum at least 100-200 hours before touching steel. Do not engrave stainless steel or hardened steel, it will be detrimental to your experience and engraving journey.

As with any art, do not rush, it will come with time, and with a lot of practice, that time will be faster than you think.

NOW available for purchase in our E3 Shop.

 

*Due to the substantial time involved with certifying the engraving machines, they are available at limited quantities. Please contact us for information to purchase. We are happy to answer questions or concerns. Students who attend E3 Engraving School will receive priority for purchase. email: e3engraving@gmail.com or (702) 540-5321 for purchase or class information. You may also check E3 Engraving’s IG for up to date availability. Thank you.